DMU 65 H monoBLOCK (Reference-Nr. 064049)

•  
  Reference number 064049

  Manufacture Year 2022

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining Centers (Horizontal)

• Manufacturer

  DMG MORI

• Control

  Heidenhain

• Description

  
  

  General
  Horizontal universal machining center !! Machine was damaged during loading and has therefore been given a completely new cab and switch cabinet. !!; Control: CELOS with Heidenhain TNC 640
  Working area 1
  Longitudinal	650 mm
  Cross	700 mm
  Vertical	950 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min

• Specification

  
  

  NC swivel rotary table	Type of Measuring system Direct measuring system
  	Table surface Ø 650 mm
  	Centre bore 50 H6 mm
  	Maximum load (table centre) 600 Kg
  Cabine	Full protection cabin
  	Rotation Speed 5. Axis 20 rpm
  	5. Axes (swivelling range) +120/-120 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 40 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 9
  	Slot width 14 mm
  Motor spindle 20,000 rpm	Motor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Kinematics axis A / C for swivel rotary table	Axis kinematics A/C for swivel rotary table Axis designation swivel axis: A Axis designation rotary axis: C 0° position A axis: table vertical Rotary axis setting: modulo Machine datum: In table center on the table top Not compatible with monoBLOCK kinem
  Tool magazine, chain, 60 pockets	Tool magazine chain magazine with 60 tool pockets HSK-A63 or optionally chosen spindle taper
  Operation panel for loading station tool magazine	Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit
  Production package 40 bar/23 l/min, 600 l tank	Internal coolant supply: coolant unit 600 l / 160 gallon, paper band filter Internal coolant supply, 40 bar/23 l/min / 580 psi/6 gallon/min through spindle centre (AD) External coolant supply 4 bar / 58 psi - 40 l/min / 10.4 gpm (theoretical pump perform
  Rotating clear-view window	Rotating clear-view window cabin door
  Split-able chip conveyor	Separable chip conveyor Less space required behind the machine for pulling out the chip conveyor in case of maintenance
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Interface for Oil and emulsion mist separator	Interface mechanical and elektrical for oil- and emulsion mist separator
  Infrared measuring probe Renishaw HSK-A 63	Infrared measuring probe Type Renishaw OMP 60 HSK-A 63
  Tool measuring in machining area Blum Laser	Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically
  3D quickSET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe)
  VCS Complete	VCS Complete Toolkit for analyzing and automatic volumetric compensation of all linear and rotary axes. (only in conjunction with option measuring probe)
  Sensorpaket i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  Tropical package (ambient temp. max. 50 °C)	Package for tropical climate for ambient temperature of max. 50° Celsius at machine location
  Safety package for power failure	Safety package for power failure: Voltage control with fast deceleration trigger Controlled shut down of the control Display of last executed program number
  Interpolation turning	Interpolation turning Turning-recessing cycle Manufacture of simple sealing surfaces and grooves using Machining Centres. For Siemens control only in horizontal and vertical plane
  Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
  Active Chatter Control ACC	Active Chatter Control ACC Improved surface quality combined with reduced machining time, increased tool lifetime
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine

• State

  Used